HomeIndexesCisco SystemsNIM-4SHDSL-EA=

Cisco Systems Nim with MMF 4 Pair G.SHDSL Efm and ATM

Cisco Systems Cisco Modules

Image may not be actual.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of Cisco products to qualify.

Manufacturer Part#  NIM-4SHDSL-EA=

UPC Code: 889728132800

Provantage Code:  CSC8WT9

Condition:  Factory New

  • Total Number of Ports: 1
  • Media Type Supported: Twisted Pair
  • Ethernet Technology: Ethernet
  • Connector Type: RJ-45
  • Application/Usage: Data Networking
  • TAA Compliant: No

Big DealsSatisfaction Guaranteed

Note: We Are Unable to Sell this Product to Dealers.
Provantage is authorized to only sell this product to a final purchaser or licensee that has acquired it for their own use and not for resale, remarketing or distribution.

NetworkingRouting and Switching DevicesModules

Cisco Systems NIM-4SHDSL-EA= Specifications

    Nim with MMF 4 Pair G.SHDSL Efm and ATM


Overview

    Product Overview

    Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access, the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths, bonding of multiple pairs (4-wire, m-pair, inverse multiplexing over EFM bonding) is supported.

    In EFM mode, the multimode G.SHDSL NIM allows bonding, as defined by IEEE 802.3ah, and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service, the maximum data rate is 61.4 Mbps, with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard, which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.).

    In ATM mode, the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode, the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.)

    The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL), Single-line DSL (SDSL), T1, E1, and services beyond E1.

    The multimode four-pair G.SHDSL NIM, together with the ISR 4000 series router, provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).

Compatibility

    Cisco 4000 Series Integrated Services Routers


Specifications

Product NameNim with MMF 4 Pair G.SHDSL Efm and ATM
Manufacturer Part NumberNIM-4SHDSL-EA=
Product TypeInterface Module
Maximum Data Transfer Rate15 Mbit/s
Ethernet TechnologyEthernet
Media Type SupportedTwisted Pair
Network TechnologyG.SHDSL
Total Number of Ports1
Country of OriginChina
Connector TypeRJ-45
Application / UsageData Networking
Interfaces / Ports Details1 x RJ-45 G.SHDSL Ethernet
The Following Are Compatible With Cisco Systems NIM-4SHDSL-EA=

Cisco Systems Cisco Catalyst 8200L with 1-Nim Slot and

Mfg Part# C8200L-1N-4T


Cisco Systems Cisco Catalyst C8200-1N-4T Router

Mfg Part# C8200-1N-4T


Cisco Systems Catalyst 8200-Ucpe Edge Series (8-Core I)

Mfg Part# C8200-UCPE-1N8


Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Cisco Systems BIG DEAL qualifications:

Purchase a minimum of $10,000 of Cisco products to qualify.


Shop with confidence! Provantage is an authorized Cisco Systems dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Cisco Systems
 
© Copyright 1984-2024 Provantage
Cisco Systems NIM-4SHDSL-EA=