C2G 18 inch 3.5MM Male 3 Position TRS to Female XLR Cable

C2G C2G41468 Specifications

18 inch 3.5MM Male 3 Position TRS to Female XLR Cable

At a Glance

C2G 1.5 ft / 18 in 3.5mm Male 3 Position TRS to Female XLR Cable Three poles/conductors for TRS jacks found on microphones and stereo audio devices Unbalanced cable, the Left and Right channels are soldered together XLR input for mixing consoles, amplifiers, and powered speakers 3' / 3 Foot / 3 Feet / 18 Inch / 18 Inches C2G Lifetime Warranty

Overview

The 3.5mm Male 3 Position TRS to Female XLR Cable is perfect for interconnecting devices with 3.5mm jacks and devices with XLR inputs ? making it ideal for mixing consoles, amplifiers, and powered speakers. This audio cable includes a 3.5mm TRS (Tip/Ring/Sleeve) connector, which means this cable has three conductors or three poles, including left and right stereo channels. The 3.5mm TRS jacks are commonly found on most stereo audio devices, while XLR inputs are commonly found on mixing consoles, amplifiers, and powered speakers. This is an unbalanced cable, so the left and right channels are soldered together making a mono signal to XLR, allowing the left and right stereo signal from a source with a 3.5mm stereo output to be converted to a single mono feed. This audio cable has 22 AWG conductors, insulated, under an aluminum foil shield, and covered by a soft PVC shell. The soft PVC jacket reduces the risk of the cable kinking and damaging the conductors. Enjoy lasting quality and excellent performance no matter the connection.

Features

Molded Kink Resistant Damage Resistant

Device Supported

See all products Audio Device  –  Tablet  –  Notebook  –  Recorder  –  Amplifier  –  Speaker  –  Microphone  –  Audio Mixer