HomeIndexesAtlasIEDAA100PHD

AtlasIED 4INPUT 100W 25V/70V/4 Mixer Amplifier with PHD Automatic

AtlasIED AA100PHD

Click image to enlarge or see more views.


Model AA100PHD

Provantage Code:  ATLD00R

Condition:  Factory New

  • Product Type: Amplifier
  • Product Model: AA100PHD
  • Limited Warranty: 3 Year
  • Minimum Frequency Response: 50 Hz
  • RMS Output Power: 100 W
  • TAA Compliant: No

Satisfaction Guaranteed

ElectronicsHome ElectronicsA/V Receivers and Amplifiers

Specifications

AtlasIED AA100PHD Specifications

    4INPUT 100W 25V/70V/4 Mixer Amplifier with PHD Automatic


At a Glance


    Rear View
    • Rear Mounted DIP Switch Allows Mute Receive for Inputs 2 and 3
    • Contact Closure Mute Terminals
    • Variable Mute Sensitivity Control for Input 1
    • Preamp In for External Processors
    • Line Output
    • Remote Input Select (RIS)
    • Remote Level Control
    • Input Assignable Zone 2 Output
    • Two Unbalanced, Summing Line Level Inputs
    • Two Balanced Mic/Line/Tel Inputs w/ Phantom Power

Overview


    Top View

    The AA100PHD is a four input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, small to medium speech privacy systems, and in applications where music on hold (MOH) plus paging is required. With one microphone/line input and two stereo line inputs, the AA100PHD will accommodate a variety of input sources including paging microphones, media players, and digital music receivers.

    What Sets the AAPHD Series Apart?

    The AA100PHD includes a patent pending automatic system test, the Push Here Diagnostic® (PHD). The PHD button is designed to check the connected loudspeaker lines for wiring and impedance errors. This test can be activated once all loudspeakers are connected and the circuit automatically verifies that the attached loudspeakers' tap settings do not exceed the amplifier's rated power, no loudspeakers are mistakenly tapped at 8Ω, and the loudspeaker wire is free from shorts.

    The unit also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use a remote wall plate (AtlasIED model WPD-RISRL) and allow the user to select the input and adjust the volume from that wall plate up to 200 feet from the amplifier.

    The AA100PHD provides 100-watts output power into 25V, 70.7V, or 4Ω loudspeaker systems. Rear panel DIP switch allows for creation of Zone 2 output/output mix using any or all of the four inputs. Unit can also be set-up to mute Inputs 2, 3, and 4 based on signal from Input 1 for paging applications where other input sources need to be muted during a page. Input 1 and Input 2 are either Mic or Line input selectable and Phantom Power is an option when using either as a mic.

Additional Product Image


Specifications

Product Name4INPUT 100W 25V/70V/4 Mixer Amplifier with PHD Automatic
Product TypeAmplifier
Audio Channels4
Maximum Frequency Response15 kHz
RMS Output Power100 W
Number of Analog Audio Inputs4
Product FamilyAAPHD
MultizoneYes
Product ColorBlack
Impedance4 Ohm
Environmentally FriendlyYes
Minimum Frequency Response50 Hz
Operating Power Consumption300 W
Total Harmonic Distortion (THD)0.5%
Country of OriginChina
Height3.7"
Width8.3"
Depth10.9"
Product SeriesAAPHD
Product ModelAA100PHD
Limited Warranty3 Year
Considering a Volume Purchase?

Shop with confidence! Provantage is an authorized AtlasIED dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

AtlasIED
 
© Copyright 1984-2024 Provantage
AtlasIED Model AA100PHD