Mygekogear By Adesso Smart Hardwire Display Kit - This Smart Hardwire Display Kit is A 9.8 Foot Cable to Make your Life Easier When Hardwiring your Dash CAM Toyour Car with the LCD Display Of the Voltage And Voltage Settings.
At a Glance
1. LCD Screen
2. 12V - 48V
3. Delay Low Voltage Protection
4. Compatible with most myGEKOgear Models
Overview
This smart hardwire display kit is a 9.8 foot cable to make your life easier when hardwiring your dash cam to your car with the LCD display of the voltage and voltage settings. This kit will prevent the battery from being depleted when the dash cam is hardwired to the car.
Features:
LCD Screen: An LCD screen displays the voltage and voltage settings.
12V - 48V: This can be installed in a compact car ranging to a large commercial vehicle.
Delay Low Voltage Protection: If low votage is detected and exceeds 6 minutes lower than set gear, power will immediately be cut off to save the battery. If the voltage rises above our low voltage setting gear range within 6 minutes (if set to 11.9V), it will not enter the low voltage protection and can continue to work; if the voltage exceeds 6 minutes remain low voltage at our set the gear range (if set to 11.9V), the low voltage protection will cut off the power supply and protect your car battery.
Compatible with most myGEKOgear models: Orbit 110, Orbit 120, Orbit 130, Orbit 510, Orbit 530, Orbit 550, Orbit 930, Orbit 950, Orbit 960, Infiniview, Infiniview Lite, E100, P500, and OwlScout
Shop with confidence! Provantage is an authorized Adesso dealer.