The Cisco MDS 9000 Family offers cost-effective multiprotocol extended distance connectivity that optimizes use of a customer's existing optical infrastructure through the Cisco Coarse Wavelength-Division Multiplexing (CWDM) SFP solution. The Cisco CWDM SFP solution has two main components: a set of...

Cisco MDS 9000 Series Multilayer Switches - Product Type: SFP - Interfaces/Ports Details: 1 x LC Duplex Connector 1000Base-X - Dimensions: 0.33" Height x 0.52" Width x 2.23" Depth - Interfaces/Ports: 1 x 1000Base-X - Data Transfer Rate: 4Gbps Gigabit Ethernet - Number of Ports/Channels: 1 ...

The Cisco 16- and 36-port 10/100 EtherSwitch modules for Cisco 2600, 3600, and 3700 series routers offer branch office customers the option to integrate switching and routing in one platform. Combining robust Layer 3 flexible WAN routing with low-density line-rate Layer 2 switching, the EtherSwitch modules provide straightforward configuration, easy deployment and integrated management in a single platform....

The Cisco 16- and 36-port 10/100 EtherSwitch modules for Cisco 2600, 3600, and 3700 series routers offer branch office customers the option to integrate switching and routing in one platform. Combining robust Layer 3 flexible WAN routing with low-density line-rate Layer 2 switching, the EtherSwitch modules provide straightforward configuration, easy deployment and integrated management in a single platform....

This Enterasys 16-port Gigabit Ethernet I/O Module delivers both 10/1000/1000Base-TX and 1000Base-X connectivity options, enabling customers to cost-effectively deploy smaller-scale backbone infrastructures. It can support a total of 16 ports of Gigabit Ethernet connectivity. What makes it unique is that this connectivity can change depending upon network needs....

The new Cisco Integrated V.92 analog modem network module provides cost-effective analog telephone service connectivity for lower-density remote-access service (RAS), dial-out and fax-out modem access, asynchronous dial-on-demand routing (DDR) plus dial backup, and remote router management. Combined with the differentiated services delivered through Cisco IOS Software, Cisco 2600 Series, 3660, and 3700 series routers offer customers best-in-class scalability, flexibility, and investment protection, all in cost-effective, multifunctional platforms....

Cisco 2600, 3600, and 3700 Series - Product Type: Network Module - Interfaces/Ports Details: 16 x Smart Serial Asynchronous/ Synchronous Serial WAN - Dimensions: 1.55" Height x 7.1" Width x 7.2" Depth - Interfaces/Ports: 16 x Asynchronous/ Synchronous Serial WAN - Status Indicators: The Network Module has one Network Module status indicator, plus one status LEDs for each serial port....

The HWIC-16A provides 16 ports of async interfaces operating at speeds up to 230.4 Kbps. 16-Port Asynchronous High-Speed WAN Interface Card use two high-density 8-port connectors....

The 16-port OC-3/STM-1 Switch Service Module is a high-density, double-height service module for use in the Cisco MGX 8850 and MGX 8950 advanced ATM multiservice switches. The 16-port OC-3/STM-1 Switch Service Module has sixteen 155-Mbps ports that can be configured as User-Network Interfaces (UNIs) or trunks to deliver IP and ATM services....

The Cisco 1610 nm CWDM SFP Module enables the transport of up to eight channels over one pair of single-mode fiber strands. This enables enterprises to increase the bandwidth of an existing optical infrastructure without adding new fiber strands. The solution can be used in parallel with other Cisco SFP devices on the same platform....

Cisco 1751 Router - Cisco 1751-V Router - Cisco 1760 Router - Cisco 1760-V Router - Product Type: PVDM - Interfaces/Ports Details: 16 x Channel - Humidity: 10% to 85% Non-condensing Relative Humidity Operating - 5% to 95% Non-condensing Relative Humidity Non-operating - Processor: 4 Digital Signal Processor ...

This new PVDM2 SIMM can be configured for high-, medium- or flex complexity via software. Flex complexity is the default configuration, and in this mode, the network module will dynamically negotiate the appropriate codec (medium or high) on a call-by-call basis. In addition, the DSPs on the PVDM2s can...

The 7GR4280-19 DFE module has 18, 1000BASE-X compliant front-panel ports that support avariety of optional Small Form Factor Pluggable (SFP) Gigabit connections using optionalMini- Gigabit Interface Cards (Mini-GBICs). There is also a slot for an optional network expansionmodule (NEM)....

Expansion Module (for the Matrix E1 WS/GWS) with 2 Mini-GBIC slots...

2 Gigabit Ethernet ports via 2 Mini Gigabit Ethernet interface card (Mini-GBIC) slots...

For complete product details Click Here....

The MGBIC-LC07 Gigabit Ethernet Interface Module is a single-mode fiber optic interface devices that can be installed into anEnterasys Networks device that supports Mini-GBICs....

Power-1 Models 5070 and 9070 - Product Type: Expansion Module - Interfaces/Ports Details: 4 x 8-pin RJ-45 Female 10/100/1000Base-T - Interfaces/Ports: 4 x 10/100/1000Base-T - Connectivity Media: Twisted Pair 10/100/1000Base-T - Data Transfer Rate: 10Mbps Ethernet - 100Mbps Fast Ethernet...

Power-1 Models 5070 and 9070 - Product Type: Fiber Module - Interfaces/Ports Details: 4 x LC 1000Base-LX - Interfaces/Ports: 4 x 1000Base-LX - Connectivity Media: Single-mode Fiber 1000Base-LX - Data Transfer Rate: 10Gbps 10Gbps Ethernet - Number of Ports/Channels: 4 - -...

Expansion Module - Interfaces/Ports Details: 4 x 1000Base-LX - Interfaces/Ports: 4 x 1000Base-LX - Connectivity Media: Single-mode Fiber 1000Base-LX - Data Transfer Rate: 1Gbps Gigabit Ethernet - Number of Ports/Channels: 4 - -...