Remote management in a stand-alone device. When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

Transition Network's media converter encode and decode T1 or E1 twisted-pair copper signals over fiber optic cable to extend the distance and transmission reliability of high-speed T1 or E1 data traffic. The device is framing independent (as ESF vs. D4) and supports all common line codes (e.g AMI, B8ZS, HDB3)....

Transition Network's media converter encode and decode T1 or E1 twisted-pair copper signals over fiber optic cable to extend the distance and transmission reliability of high-speed T1 or E1 data traffic. The device is framing independent (as ESF vs. D4) and supports all common line codes (e.g AMI, B8ZS, HDB3)....

When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely. The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

TRENDnet's TFC-1600 16-slot EIA-19" Rack-Mount Chassis system provides housing for up to 16 TFC series media converters. Designed for continuous operation, the chassis is equipped with dual cooling fans and redundant power supplies (optional). Its Plug-and-Play and Hot-Swap features allow installing/removing the converter unit without powering off the chassis....

Finisar's FTLF1322P1xTR SFP transceivers are compatible with the Small Form Factor Pluggable MSA. They comply with SONET and SDH standards. Digital diagnostics functions are available via the 2-wire serial bus. PRODUCT FEATURES: Up to 622 Mb/s bi-directional data links; Hot-pluggable SFP footprint; Built-in digital diagnostic functions; Uncooled Fabry-Perot 1310nm laser transmitter; Duplex LC connector; RoHS compliant and lead-free; Metal enclosure, for lower EMI; Single 3.3V power supply; Low power dissipation...

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them in-band from admin locations....

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations....

Canary LAN Extender, CLE-1061S, UTP-to-Fiber Bridging Media Converter is longtime standards for 10/100Mbs UTP media conversion to single-mode fiber. With the CLE-1061S, the transition between 10 Mbs and 100 Mbs is very straightforward. They easily make simple connections linking legacy 10 Mbs networks and newer 100 Mbs segments into a unified network....

Canary LAN Extender, CLE-1062S, UTP-to-Fiber Bridging Media Converter is longtime standards for 10/100Mbs UTP media conversion to single-mode fiber. With the CLE-1062S, the transition between 10 Mbs and 100 Mbs is very straightforward. They easily make simple connections linking legacy 10 Mbs networks and newer 100 Mbs segments into a unified network....

ULTAMUS RAID 1200/4800 - Product Type: SFP - Interfaces/Ports Details: 1 x Fiber Channel - Interfaces/Ports: 1 x Fiber Channel - Number of Ports/Channels: 1 - Additional Information: Data Link Protocol: 4Gb Fibre Channel - -...

MU/E-PSW-FX01(SC) Mini Bridging Media Converter provide a cost-effective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers aspace saving alternative while it converts copper to fiber with the smallest footprint available in the industry....

Media Converter - Connectivity Media: 10Base-T Twisted Pair - 10Base-FL Fiber - Form Factor: Internal - Interfaces/Ports: 1 x RJ-45 - 1 x SC - Number of Ports: 2 - Network Technology: 10Base-T - 10Base-FL - Certifications & Standards: - FCC Class A and VDE-B compliant. - Compliant with CE, UL, CSA & TUV Safety Standards....

This Canary Media Converter is long-time standard for 10Mbps media conversion, and are still available for legacy applications. It provides flexible combinations of UTP/Fiber Conversion. Fiber ports provide multi-mode connections....

This Canary Media Converter is long-time standard for 10Mbps media conversion, and are still available for legacy applications. It provides flexible combinations of UTP/Fiber Conversion. Fiber ports provide multi-mode connections....

This media converter with a UTP connection features an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch,with a simple UTP cable. The media converter also allows the installer to test the integrity of the fiber connection, by forcing the converter to communicate over the fiber cable....

10BaseT to 10BaseFL/ST (MM) (2km) - FEATURES - All switches, media connectors & LEDs on front panel - Compact physical size - Fiber test switch - Installs into AT-MCR12 rackmount chassis - MDI/MDI-X crossover switch allows connection to a PC, hub or switch - MissingLink integrity monitoring - Plug & Play for fast, easy installation...

AT-MC13-30 10T to 10FL Media Converter enables service providers to use fiber cabling to extend the size of UTP networks. It is powered by an external power supply unit for use in stand-alone applications. The MissingLink feature allows the ports on the media converter to convey the status of their links....

The CBFTF1018-155 2-port Ethernet/Fast Ethernet bridging media converter is designed to be installed in a Transition Networks PointSystem chassis and connects 10Base-T Ethernet or 100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base-FX Fast Ethernet fiber network....