IConverter 10FL/T Manageable Media Converter provides 10Base-T UTP to 10Base-FL Fiber conversion. It is an In-Band or Out-of-Band SNMP-managed media converter and is suitable for LAN and MAN networks where copper to fiber conversions are required. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations....

This iConverter 10FL/T models is available with multimode fiber. It support ST connector. The UTP port supports 10Base-T in either half or full duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations....

Transceiver - Product Model: 8340-0 - Interfaces/Ports: 1 x RJ-45 - 1 x BNC - Number of Ports: 2 - Network Technology: 10Base-T - 10Base-2 - Product Line: iConverter - Additional Information: Wide Temperature Range - -...

The iConverter 19-Module Chassis Managed Redundant-Power Chassis features three hot-swappable, redundant power supplies. Universal AC, 24VDC and 48VDC power supplies can be used in any combination. Omnitron's exclusive triple-redundant power supplies operate in load-sharing mode to reduce the burden on each power supply to extend the lifetime and fault tolerance....

The 2U (3.5 inch) high iConverter 19-Module Chassis has triple-redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and a high-density rack footprint are essential....

The 2U (3.5 inch) high iConverter 19-Module Chassis has triple-redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and a high-density rack footprint are essential....

The 2U (3.5 inch) high iConverter 19-Module Chassis has triple-redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and a high-density rack footprint are essential....

The 2U (3.5 inch) high iConverter 19-Module Chassis has triple-redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and a high-density rack footprint are essential....

The iConverter 2-Module Power Chassis is a compact, versatile chassis featuring a single internal universal AC or 18-60VDC power supply. The chassis provides housing for all iConverter media converters and switch modules....

The iConverter 2-Module Power Chassis is a compact, versatile chassis featuring a single internal universal AC or 18-60VDC power supply. The chassis provides housing for all iConverter media converters and switch modules. The 2-Module Chassis features a backplane that enables sharing of Ethernet data...

The iConverter 2Fx managed media converter is a member of the modular iConverter product family. The 2Fx provides a cost effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and re-times the fiber optic signal, and multiple 2Fxs can be used to extend total network distances....

It provides a cost-effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and retimes the fiber optic signal, and multiple 2Fxs can be used to extend total network distances....

The iConverter 2Fx managed media converter is a member of the modular iConverter product family. The 2Fx provides a cost effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and re-times the fiber optic signal, and multiple 2Fxs can be used to extend total network distances....

The iConverter 2-Module Power Chassis is a compact, versatile chassis featuring a single internal universal AC or 18-60VDC power supply. The chassis provides housing for all iConverter media converters and switch modules. The 2-Module Chassis features a backplane that enables sharing of Ethernet data...

The iConverter 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 8826-0-B 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 8827-1-B 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....

The iConverter 4xT1/E1 MUX operates in pairs, and canbe used in applications where services from legacy TDMequipment requires transport across long distances that exceedthe reach or capacity of copper. This includes applications suchas T1/E1 extension, mobile backhaul and building-to- buildingPBX connectivity, making it ideal for Enterprise, Telecom andUtility industries....