The CBFTF1029-156 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base- FX Fast Ethernet fiber network....

The CBFTF1029-157 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base- FX Fast Ethernet fiber network....

The CBFTF1029-158 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base- FX Fast Ethernet fiber network....

The CBFTF1013-155 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base- FX Fast Ethernet fiber network....

Media Converter - Form Factor: Internal - Interfaces/Ports: 1 x RJ-45 - 1 x LC - Dimensions: 1" Height x 3.25" Width x 4.8" Depth - Number of Ports: 2 - Network Technology: 10/100Base-TX - 1000Base-LX - Distance Support: 20km - Maximum Distance Support: 20km - Additional Information: Optical Wave Length: 1310nm ...

Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments....

Fast Ethernet Bridging Media Converter will provide conversion and integration solution for half and full-duplex environments. Convert 10/100 on copper to straight 100 on fiber. Half or Full-Duplex on bothports....

M/E-PSW-FX-01(SC) Mini 10/100 Bridging Media Converter provides a cost-effective methodfor integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry....

TN-GLC-FE-100LX SFP Transceiver is small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-LX interfaces to the network through the SFP connector....

The Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver. It significantly reduces network downtime, adding a new level of redundancy to 10/100 Ethernet connections. It also provides a redundant path for critical 10/100 devices....

The Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver. It significantly reduces network downtime, adding a new level of redundancy to 10/100 Ethernet connections. It also provides a redundant path for critical 10/100 devices. In a 10/100 Ethernet network, a critical device such...

This Ethernet to SM Fiber Media Converter kit creates a cost-effective Ethernet-fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a fiber backbone. The converter offers wavelength-division multiplexing, enabling bi-directional communication over a single strand of fiber, essentially doubling the capacity of your existing fiber infrastructure without having to install new cabling....

Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments....

Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link. Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration....

SBFTF1016-110 Fast Ethernet Media Converter is Bridging media converter that provides conversion from 10/100Base-TX to 100Base-FX and integration solutions for half-duplex and full-duplex environments....

Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments....

The SPOEB1011-100 Power over Ethernet (POE) is a two port 10/100Base-TX to 100Base-FX media converter capable of providing power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media Dependent Interface (MDI) twisted pair cable. The SPOEB1011-100 emulates Power Sourcing Equipment (PSE) and...

The Just Convert-IT POE Stand-Alone Media Converter is a two port 10/100Base-TX to 100Base-FX media converter capable of providing power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media Dependent Interface (MDI) twisted pair cable. This Media Converter emulates Power Sourcing Equipment...

The Power Over Ethernet Stand-Alone Media Converter is a two port 10/100Base-TX to 100Base-FX media converter capable of providing power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media Dependent Interface (MDI) twisted pair cable. The Converter emulates Power Sourcing Equipment (PSE)...

Media Converter - Connectivity Media: 10/100Base-TX Twisted Pair - 100Base-FX 1300 nm Multi-mode Fiber - Interfaces/Ports: 1 x RJ-45 - 1 x ST Duplex - Number of Ports: 2 - Network Technology: 10/100Base-TX - 100Base-FX - Connectivity: Twisted Pair - Fiber - Distance Support: 2km ...

Media Converter - Connectivity Media: 10/100Base-TX Twisted Pair - 100Base-FX 1300 nm Multi-mode Fiber - Interfaces/Ports: 1 x RJ-45 - 1 x SC Duplex - Number of Ports: 2 - Network Technology: 10/100Base-TX - 100Base-FX - Connectivity: Twisted Pair - Fiber - Distance Support: 2km ...

The SPOEB1013-100 Power over Ethernet (POE) is a two port 10/100Base-TX to 100Base-FX media converter capable of providing power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media Dependent Interface (MDI) twisted pair cable. The SPOEB1013-100 emulates Power Sourcing Equipment (PSE) and...

This converter include PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs of the MDI....

PoE media converter combine data received over a fiber optic link with -48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converter is Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af standard....