The iConverter Gx AN Media Converter is a managed media converter that provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices. - The UTP port supports auto-negotiation or forced negotiation of duplex modes and pause capability while the fiber port supports both manual or auto-negotiation....

IConverter 8502N-0 Gigabit Ethernet Media Converter is a managed media converter that provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices. The UTP port supports auto-negotiation or forced negotiation of duplex modes and pause capability while the fiber port supports both manual or auto-negotiation....

IConverter 8761-1 Managed Serial RS-232 to Fiber Media Converter that transmits serial protocol over fiber media.Fiber transmission extends the serial signals and is immune from electrical and magnetic interference....

IConverter T1/E1 Media Converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1/E1 media converter operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security....

IConverter Fast Ethernet Media Converter conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities....

IConverter Fast Ethernet Media Converter conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent and securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities....

Media Converter - Interfaces/Ports: 1 x DB-9 RS-485 Serial - 1 x LC - Number of Ports: 2 - Product Line: iConverter - Distance Support: 5km - Maximum Distance Support: 5km - -...

The Omnitron iConverter RS422/485 is a managed serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media....

IConverter 8530-1 Managed Media Converter is ideal in network core or Central Office (CO)applications when conversion is required from a 10/100/1000 core switch to Gigabit Ethernet fiber, and in edge applications when the Gigabit Ethernet fiber is converted back into 10/100/1000 copper anddelivered to a departmental or Customer Premise (CPE) switch....

The iConverter GX/T media converter is a member of the modular iConverter product family. The GX/T provides 10/100/1000 UTP copper to GigE fiber conversion and can be used in a managed or unmanaged fashion. - The GX/T is ideal in network core or Central Office (CO) applications when conversion is required from a 10/100/1000 core switch to GigE fiber, and in edge applications when the GigE fiber is converted back into 10/100/1000 copper and delivered to a departmental or Customer Premise (CPE) switch....

IConverter 6750-0-FK Fast Ethernet Media Converter The 6750-FK provides five auto-negotiating 10/100 UTP ports with auto-crossover that enables easy attachment to hubs, switches and workstations. The 100BASE-FX fiber port supports half or full duplex operation....

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities....

The iConverter 10/100M Network Interface Device (NID) media converter provides 10Base-T or 100Base-Tx (10/100) to100Base-Fx Fiber media conversion with integrated management. The 10/100M conforms to Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X (FTTX) Metropolitan and Enterprise LAN networks....

The iConverter 8363-1 100Fx/Tx model is available with single-mode and single-fiber options. They support SC connector. The UTP port supports 100BASE-TX in either Half or Full-Duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations....

The iConverter 8926N-0 Media Converter Interface Device conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks....

IConverter 8927N-1 Media Converter Interface Device conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks....

The iConverter 8241-1 1-Module Power Chassis supports a single iConverter module and is powered by an external AC power adapter. The 1-Module Power Chassis is designed for network edge or Customer Premises deployments where compact size, low cost and flexible upgrades are important....

The 1 inch high 1-Module iConverter Power Chassis supportsa single iConverter module and is powered by an external ACpower adapter. The 1-Module Power Chassis is designed fornetwork edge or Customer Premises deployments wherecompact size, low cost and flexible upgrades are important....

The iConverter 8246-111 Redundant Power Chassis is ideal for mission-critical Customer Premises (CP) Ethernet services, and in applications where the monitoring of external events is required. The chassis supports multiple power sources, configurable 10/100 Ethernet ports and a wide variety of alarm options....

The 1 inch high 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter. The 1-Module Power Chassis is designed for network edge or Customer Premises deployments where compact size, low cost and flexible upgrades are important....

The 1 inch high 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter. The 1-Module Power Chassis is designed for network edge or Customer Premises deployments where compact size, low cost and flexible upgrades are important....