Migrate to Gigabit Ethernet in a cost-effective manner. Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs. Transition Networks 1000BASE-T to LX converter allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 40 km)....

Canary's Gigabit Ethernet Copper-to-Fiber converters combine existing 100 meter Category 5(E) UTP and Fiber optic segments to deliver Gigabit data across the network. They are ideal for data intensive backbones in the enterprise or campus and can be used to take advantage of low-cost Gigabit capable switches....

Transition Networks's 1000BASE-T to 1000Base-LX converter SGETF1029-116 allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 80 km)....

Transition Networks's 1000BASE-T to 1000Base-LX converter SGETF1029-117 allows users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 80 km). Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs....

The iConverter GX/TM Gigabit Media Converter and Network Interface Device (NID) provides 10Base-T, 100Base-Tx or1000Base-T (10/100/1000) to 1000Mbps fiber media conversion with integrated management. GX/TM media converter is usedto provide managed copper demarcation points at the customer premises and network edge with Quality of Service (QOS)capability....

HDMI Extender - Certifications & Standards: HDCP - Additional Information: - Extends video/audio transmission from an HDMI source to an HDMI display over one economical CAT5e/6 cable - Supports a local HDMI display - Unlimited cascading - Minimize cable skew with the adjustable 8-level equalization knob...

The converter will provide a solution for those users that desire to extend the point of presence of a copper V.35 / X.21 / RS449 / RS530 / RS232 connection at data rates up to ten megabits per second....

The converter will provide a solution for those users that desire to extend the point of presence of a copper V.35 / X.21 / RS449 / RS530 / RS232 connection at data rates up to ten megabits per second. The stand-alone converter can be remotely managed when used in conjunction with a chassis card version....

The CPSVT2613-100 media converter will provide a solution for those users that desire to extend the point of presence of a copper V.35 / X.21 / RS449 / RS530 / RS232 connection at data rates up to ten megabits per second....

Transition Networks high-speed serial copper-to-fiber media converter connect V.35, X.21, RS-449, RS-530, or RS-232 signals on copper cable, at speeds up to 10 Mb/s, through a universal 26-pin serial interface connector to fiber-optic cable. Transition Networks also supplies cables for connecting network equipment to that media converter....

The SISTG1040-111-LR(T) is a ruggedized, unmanaged Gigabit Ethernet media converter designed to allow low-speed or legacy copper-based devices to be bridged onto a Gigabit Ethernet fiber backbone....

The SISTG1014-111-LR(T) is a ruggedized, unmanaged Gigabit Ethernet media converter designed to allow low-speed or legacy copper-based devices to be bridged onto a Gigabit Ethernet fiber backbone....

Transition Network's Industrial Converter Switch is hardened device designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments. - The Converter switch can connect to either 10Base-T or 100Base-TX ports and can provide redundant 100Base-FX fiber optic connections for links up to 2km....

The SISTG1013-111-LR(T) is a ruggedized, unmanaged Gigabit Ethernet media converter designed to allow low-speed or legacy copper-based devices to be bridged onto a Gigabit Ethernet fiber backbone....

HP ProCurve 1000BASE-ZX SFP Module is small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber....

HP ProCurve 1000BASE-LX SFP Module is small form-factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (single-mode) or 550 m (multimode)....

ProCurve 1000Base-SX SFP Module is a small form factor pluggable (SFP) gigabit SX transceiver that provides a full-duplex gigabit solution up to 550 meters on multimode fiber....

The Ethernet to Coax HPNA Adapter twin-pack provides the everything you need to bridge the gap between different networking types (ethernet and coax cabling) commonly seen in homes with satellite TV. Developed to support new applications, this pair of adapters allows high-bandwidth content to be transferred into a commonly used format enjoyed by most consumers....

Videolarm's EOC1N offers a more economical solution when addressing anetwork system adoption by converting the signal processing speed from analogvideo (co-ax) into a high-speed Ethernet mobility. The EOC1N simply connectsto your existing Coax cable infrastructure and into any Videolarm IP Ready ornetwork CCTV camera system....

The iConverter GX/F managed media converter is a member of the modular iConverter product family. The GX/F provides single-mode to multimode fiber conversion and rate conversion between 1000BASE-X and 100BASE-FX....

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities....

As a Transport NID, the GM3 operates as a remotely-managed media converter with carrier-grade OAM capabilities. It is service transparent, and passes all data without performing traffic management. The traffic management functions can be performed by the Service Provider at the edge of the network....

The iConverter GX/TM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The GX/TM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning....

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities....