The AD16 aluminum outdoor tubular housing offers outstanding protection for your camera. The AD16 is an environment housing that is sealed to protect from dust particles that could damage camera equipment. Includes an integrated heater that is located close to the faceplate to minimize fogging in high humidity and/or freezing under cold temperature conditions....

The AP16CH1 aluminum outdoor tubular housing offers outstanding protection for your camera. The AP16CH1 is pressurized to seal out condensation, dust, insects and pollution. In-the-field pressurization is easy with the Schrader valve included on each unit, as well as a safety relief valve to prevent over pressurization....

The AP16CH2 environmental, pressurized housing shall be constructed from .16" (4mm) thick aluminum. The camera housing shall be sealed on both ends by radial pressure O-rings to create a tight seal. Front to back motion shall be prevented by a retaining ring in the front and screws in the back. Chemically strengthened glass shall be used for the faceplate....

The OH201TL Recessed Drop Ceiling Dome Housing is specifically designed for drop ceiling applications where fixed cameras are used. It easily replaces existing 2' x 2' ceiling tiles, offering discreet placement of cameras. It allows varying size cameras and camera lens combinations to be accommodated....

The VLPW20THB2 Camera Enclosure is a general-purpose 20" outdoor dome. It can accommodate 1, 2, 3 or even 4 fixed cameras. The dome can also house pan/tilt camera systems. A quick release plate is included for these systems to make installing and servicing easier....

Axis Pendant Kit expands the options for mounting the Network Cameras with a number of available mounts. Especially the tubes for hard ceiling mount will be useful....

The O124CL is an IP Ready indoor 12" dome housing. It is designed to replace a 2' x 2' ceiling tile, to conceal the camera system and obscure the direction of the camera. The top of the housing is completely enclosed with ABS plastic. Servicing is done by detaching the lower dome, which is secured by a safety lanyard (wire) attached to the upper body....

The O124TL is an IP Ready indoor 12" dome housing. It is designed to replace a 2' x 2' ceiling tile, to conceal the camera system and obscure the direction of the camera. The top of the housing is completely enclosed with ABS plastic. Servicing is done by detaching the lower dome, which is secured by a safety lanyard (wire) attached to the upper body....

The IRM7CN is a low profile indoor recessed ceiling mount dome housing. It features a 7" dome, which accommodates standard body fixed cameras up to 7.5" in length. The upper body is made of heavy 10-gauge aluminum, and a white powder coat cast trim ring gives the IRM7CN a clean, streamlined look. Unit is completely water and dust tight (IP66 rated)....