IC485AI, the Isolated Converter, is a bi-directional converter that transparently converts RS-232 signals to RS-422/RS-485 signals (and vice versa), thus permitting the creation of reliable long distance communication systems using standard computer hardware. - IC485AI provides point-to-point, multi-drop, and simplex operations over 4000 feet....

Number of Connectors: 3 - Connector Details: 1 x 25-pin DB-25 Female RS-232 - 1 x 4-pin - 1 x RJ-11 - Package Type: Retail - Compatibility: - - - Material: Plastic - Data Transfer Rate: 100Kbps - Input Voltage: 9 V DC - Power Consumption: 90mW Maximum - Additional Information: - Data transmission controlled by the RTS signal...

The IC-485S is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter....

The SXP-320A is an interface converters that allows Centronics and RS-232 devices to communicate with each other (a computer with an RS-232 output to a Centronics Parallel printer, for example). The unit is reversable enabling you to convert from serial to parallel or parallel to serial. These two way converters provide a DB-25 RS-232C (DCE) compatible connector, and a C-36 Centronics connector....

The SXP-325 is an interface converters that allows Centronics and RS-232 devices to communicate with each other (a computer with an RS-232 output to a Centronics Parallel printer, for example). The unit is reversable enabling you to convert from serial to parallel or parallel to serial. The SXP-325 is configured with 512 KB of memory allowing it to serve as a printer buffer....

The SXP-500 allows Centronics and RS-232 devices to communicate with each other via serial to parallel or parallel to serial conversion. Simple DIP Switch settings establish the flow direction, serial transfer parameters, etc. The serial baud rate can be set from 1200 to 115200 bps., with support for both hardware and software (XON/XOFF) handshaking....

Number of Connectors: 2 - Product Type: Type A USB to 9-pin DB-9 Male - Connector Details: 1 x Type A USB 1.1 USB - 1 x 9-pin DB-9 Male RS-232 - Packaged Quantity: 5 - -...