HomeIndexesTripp LitePDUMH15AT

Tripp Lite PDUMH15AT Digital Metered PDU 8 NEMA5-15R 15A

Tripp Lite PDUMH15AT

Click image to enlarge or see more views.


Tripp Lite

Model PDUMH15AT

UPC Code: 037332126658

Provantage Code:  TRPL1L7

  • Product Type: PDU
  • Input Receptacles: 2 x NEMA 5-15P
  • Input Voltage: 120 V AC
  • Form Factor: Rack-mountable
  • Output Receptacles: 8 x NEMA 5-15R

100% Satisfaction Guaranteed

ComputingPower AccessoriesPower Distribution Units (PDU)

Tripp Lite PDUMH15AT Specifications

    PDUMH15AT Digital Metered PDU 8 NEMA5-15R 15A


Summary

    Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R outlets, and two 12 ft. 5-15P input power cord.

    Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS systems or to create a redundant dual-UPS power source for a critical, single-corded network device.

Details

    Features Include
    • 120V 15A metered PDU system with Automatic Transfer Switch (ATS)
    • Dual input cords, one attached (primary) and one optional-use detachable cord (secondary)
    • Included cordsets support 5-15P plug-in connection
    • Front panel digital ammeter displays power consumption in amps
    • 8 built-in NEMA 5-15R output receptacles
    • Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware
    • Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches

    In the box

    • PDU with attached 5-15P input power cord
    • Detachable C13 to NEMA 5-15P 12 ft / 3.6m power cord for optional secondary input
    • User manual with warranty information

Overview

    Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R outlets, and two 12 ft. 5-15P input power cord. Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS s

Specifications

General Information
Product NamePDUMH15AT Digital Metered PDU 8 NEMA5-15R 15A
Product ModelPDUMH15AT
Product TypePDU
Technical Information
Input Receptacles2 x NEMA 5-15P
Output Receptacles8 x NEMA 5-15R
Management
Management
  • Optional Automatic Transfer Switch (ATS) function enables for hot-swappable UPS maintenance bypass
  • Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
  • Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP
Power Description
Input Voltage120 V AC
Output Voltage120 V AC
Power Rating1.80 kVA
Physical Characteristics
Form FactorRack-mountable
Rack Height1U
Height1.8"
Width17.5"
Depth14.5"
Warranty
Limited Warranty2 Year
Miscellaneous
Package Contents
  • PDUMH15AT PDU Metered ATS 120V 15A 8 Outlet
  • PDU with attached 5-15P input power cord
  • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
  • User manual with warranty information
Green CompliantYes
Other Information
Cord Length12
Certifications & Standards
  • 60950
  • Class A
  • RoHS compliant
Supplies/Accessories for Tripp Lite PDUMH15AT






The Following Are Compatible With Tripp Lite PDUMH15AT






Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $1,500 for hardware, or $750 for cables.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2015 Provantage
Tripp Lite Model PDUMH15AT