Tripp Lite 5kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS. 5000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning. Full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects brownouts and overvoltages from 65V to 140V (L-N). Dual-conversion UPS converts raw input from AC to DC, then back to perfect sine wave AC output. Network management interfaces include combination RS-232 enabled and contact closure serial port, enhanced USB port and SNMPWEBCARD slot. Includes USB and DB9 serial ports. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. Two L6-30R, two L6-20R and eight 5-15/20R output receptacles.
SU5000RT4U UPS System (with SUPDMB56 detachable PDU module)
USB, DB9 and EPO cabling
Rackmount installation kit for 4 post rack enclosures
Owner's manual and warranty information
Backup / Run Time (Half Load)
Automatic & Manual
Certifications & Standards
Tested to UL1778 (USA)
FCC Class A (Emissions)
Plug / Connector Type
Emergency Power OFF
Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting power to connected loads.
Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 65V (L1-N:L2-N). Below this point, output is maintained utilizing battery reserves.
High voltage transfer to battery power: Maintains continuous operation during overvoltages to 140V (L1-N:L2-N). Above this point, output is maintained utilizing battery reserves.
Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure.
Typical Applications: Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Output frequency regulation: Regulates line frequency to 50/60Hz +/- 0.05Hz