HomeIndexesTripp LiteN425-03M

Tripp Lite 3M/10FT Fiber Optic Mode Conditioning LC/MC to SC Patch Cable

Tripp Lite N425-03M

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Model N425-03M

UPC Code: 037332167798

Provantage Code:  TRPA2JN

Condition:  Factory New

  • Product Type: Network Cable
  • Connector Type on First End: LC Network - Male
  • Cable Type: Fiber Optic
  • Cable Length: 10 ft
  • Product Color: Orange
  • TAA Compliant: No

Big DealsSatisfaction Guaranteed

CablesComputer and Printer CablesUSB Cables

Specifications

Tripp Lite N425-03M Specifications

    3M/10FT Fiber Optic Mode Conditioning LC/MC to SC Patch Cable


At a Glance


    Front View
    • Converts Singelemode LC GBIC to Multimode SC Patch Panel
    • 62.5/125 and 8.3/125
    • Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss

Overview

    Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. N425-Series cables convert a Singlemode LC GBIC to an SC Multimode patch bay. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing Multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber.

Device Supported

    Network Device

    Router

    Switch


Specifications

Product Name3M/10FT Fiber Optic Mode Conditioning LC/MC to SC Patch Cable
Product TypeNetwork Cable
Cable CharacteristicPatch Cable
Cable TypeFiber Optic
Connector Type on First EndLC Network - Male
Connector Type on Second EndSC Network - Male
Fiber Optic ModeMulti-mode

Single-mode

Product ColorOrange
Color FamilyOrange
Cable Length10 ft
Environmentally FriendlyYes
Core / Cladding Diameter62.5/125 µm

8.3/125 µm

Connector on First End Details2 x LC Network - Male
Connector on Second End Details2 x SC Network - Male
Country of OriginChina
Product ModelN425-03M
Limited WarrantyLifetime
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2024 Provantage
Tripp Lite Model N425-03M