Tripp Lite DVI over CAT5 Active Extender Kit

Tripp Lite B140-101X Specifications

DVI over CAT5 Active Extender Kit

Summary

Rear View Tripp Lite's B140-101X DVI over Cat5 Active Extender Wallplate Kit is the perfect solution for those who need to extend a DVI-D Single-Link signal up to 200 ft. from the source. When using 24Awg, solid wire Cat5e/6 cabling (Tripp Lite N202-Series), the B140-101X can extend a 1024 x 768 (60Hz) signal up to 200 ft., or a 1920 x 1080 (60Hz) up to 150 ft.. Installation is quick and easy: Simply attach the local unit to your DVI source, attach the remote unit to your display, and then connect a Cat5e/6 patch cable between the two. If necessary, use the built-in Equalization setting on the remote unit to adjust the video image. Mounting hardware is included that allows the remote unit to be wallmounted, rackmounted or pole-mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Features Include Kit comes with both local transmitter and remote receiver units. Extend a DVI-D Single-Link signal up to 200 ft. at 1024 x 768 (60Hz), or up to 150 ft. at 1920 x 1080 (60Hz), when using 24Awg, solid wire Cat5e/6 cabling. (Tripp Lite N202-Series) Remote unit features built-in Equalization setting that allows for adjustment of the video image. Mounting hardware is included that allows the remote unit to be wallmounted, rackmounted or pole-mounted. No software or drivers required. HDCP and DDC compatible Compatible with all operating systems. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty.

Details

In the box B140-101X local transmitter unit B140-101X remote receiver unit Screwdriver (used for Equalization control) Mounting hardware External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owners manual

At a Glance

Extender kit comes with transmitter and receiver units Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft. Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution Can further expand the range and number of monitors by adding B140-110 repeaters Compatible with all operating systems Plug and play, no software or drivers required Features a built-in Equalization control for adjustment of the video image

Overview

The B140-101X is a DVI Over Cat5 Active Extender Kit that comes with both transmitter and receiver units. It transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-101X is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Connect a the built-in DVI connector on the transmitter unit to a DVI source. Connect the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the RJ45 ports on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft.. Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..

Additional Product Images

See all products