HomeIndexesManufacturerGroupAPS3636VR

Tripp Lite APS3636VR PowerVerter 3600W Lineint

Tripp Lite APS3636VR

Click image to enlarge or see more views.


Tripp Lite

PowerVerter APS Model APS3636VR

UPC Code: 037332042392

Provantage Code:  TRPI01C

  • Product Type: Power Inverter
  • Load Capacity: 3.60 kW Continuous Power / 7.20 kW Peak Power
  • Frequency: 60 Hz ±0.3Hz
  • Waveform Type: Sine Wave
  • Output Voltage: 120 V AC

100% Satisfaction Guaranteed

ComputingPower AccessoriesPower Inverters

Tripp Lite APS3636VR Specifications

    APS3636VR PowerVerter 3600W Lineint


Highlights

    PowerVerter APS Series feature a 3-stage battery charger and high efficiency output, creating the most advanced, feature-rich integrated inverter/battery chargers to date. APS units are ideally configured to provide uninterrupted power to computers, fans, lighting, sump pumps and other equipment over an extended period of time. They can be used as an extended-run UPS or emergency power supply.

Summary

    Tripp Lite's APS3636VR 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 120V AC power from a 36V DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts and overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages.

    PowerVerter APS Inverters accommodate peak surge demands by delivering more output power than their continuous rating. Compare the Continuous and Peak Surge wattage ratings, and youll find PowerVerter Plus Inverters supply up to double their output to easily handle equipment start up and motor cycling requirements. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous output for up to 1 hour.

Details

    Features Include

    Functions as an extended run, line interactive UPS system or standalone power supply

    Built-in voltage regulation corrects site brownouts and overvoltages without using battery power

    Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts

    3600 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads

    Battery runtime is dependent upon the size and number of user-supplied batteries in 36V configuration

    Hardwire input and output connections supported, DC input terminals for 36V battery connection

    Converts 36V DC to 120V AC

    Frequency control for operating stability

    Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries

    Resettable circuit breaker protects APS against system overload

    Switch allows user to select between off, auto-invert and charge-only settings

    6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)

    Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup

    Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)

    RJ45 port allows connection of APS remote switch (part# APSRM4)

    Allows unlimited runtime capability by allowing the use any number of user-supplied batteries

    In the box

    • APS3636VR Inverter/Charger
    • Instruction manual with warranty information

Overview

    Tripp Lite's APS3636VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or a truck/RV/Industrial inverter. Supplies up to 3600 watts of continuous 120V AC power from any 36V battery. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utilty or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Included APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.

Specifications

General Information
Product NameAPS3636VR PowerVerter 3600W Lineint
Product TypePower Inverter
Product LinePowerVerter
Product SeriesAPS
Product ModelAPS3636VR
Technical Information
Plug / Connector TypeTerminal Block

Hardwired

ReceptaclesHardwired
Power Description
Input Voltage120 V AC

36 V DC

Frequency60 Hz ±0.3Hz
Output Voltage120 V AC
Load Capacity3.60 kW Continuous Power / 7.20 kW Peak Power
Waveform TypeSine Wave
Physical Characteristics
Height7.3"
Width8.5"
Depth16.3"
Warranty
Limited Warranty1 Year Limited
Miscellaneous
Package Contents
  • PowerVerter APS3636VR Power Inverter
  • Instruction manual with warranty information
  • Wired Remote Switch with full LED status indicators
Other Information
Green CompliantYes
Green Compliance Certificate / AuthorityRoHS
Switching Time16.60 ms
Supplies/Accessories for Tripp Lite APS3636VR

Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $1,500 for hardware, or $750 for cables.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2015 Provantage
Tripp Lite PowerVerter APS Model APS3636VR