Summary
With speeds ten times faster than fast Ethernet, Gigabit Ethernet is the new standard for broad-bandwidth networking. Give your high-powered workstations or network servers up to 2Gbits/sec (full-duplex mode) of dedicated bandwidth with the StarTech.com ST1000BT32, a 10/100/1000 Mbits/sec Gigabit PCI networking card for 32-bit systems. The card complies with IEEE 802.3ab Gigabit Ethernet standards and offers advanced features like Jumbo Packet support to keep your high-performance applications and devices operating at their maximum capacity. The card supports both full- and half-duplex communications and uses Auto-Negotiation to ensure backwards- compatibility with 100BaseTx and 10BaseT Ethernet standards. The ST1000BT32 is Plug and Play compatible and works with Cat 5e and above Ethernet cables, so your migration to Gigabit Ethernet doesn't mean a total network overhaul. |
Details
Features Include- Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x standards
- Supports 32-bit 33/66MHz PCI local Bus Master for high-speed operation
- One RJ-45 connector supports 1000Mbits/sec, 100Mbits/sec or 10Mbits/sec network speed and Auto-MDI/MDI-X
- Plug-and-Play installation
- Support IEEE 802.3x full-duplex flow control
- Full-duplex design increases your network performance to 20/200/2000Mbits/sec
- Supports PCI 2.1 Wake on LAN function
- Supports IEEE 802.1Q VLAN tagging for up to 64 VLANs
- Three LED indicators show network link/activity and 10/100/1000Mbits/ sec selection
|
At a Glance
- A single 10/100/1000Mbps compatible RJ45 Ethernet port
- Network Link/Activity and 10/100/1000 Mbps LED indicators
- Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging
- Full and half duplex support
- Supports Wake-on-LAN function
- Crossover Detection & Auto-Correction (Auto MDI/MDI-X)
- Includes a low profile installation bracket
|
Overview
This PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network, and is fully compatible with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards.
Suitable for any PCI-enabled client, server or workstation, the Gigabit Ethernet Network Adapter Card supports high performance dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.
Compatible with a broad range of operating systems, including Linux, Windows 10, 8/8.1, ME, 2000, XP, XP-64bit, Vista, Vista-64bit, 7, 7-64bit as well as Mac OS 10.4, this high quality PCI Gigabit NIC includes an optional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server. More from the Manufacturer |
Package Contents
- 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card
- 1 x Low Profile Bracket
- 1 x Driver CD
- 1 x Instruction Manual
|
Product Name | 1 Port PCI 32 Bit Gigabit Ethernet Network Adapter Card |
Product Type | Gigabit Ethernet Card |
Number of Network (RJ-45) Ports | 1 |
Total Number of Ports | 1 |
Form Factor | Plug-in Card |
Network Technology | 10/100/1000Base-T |
Data Transfer Rate | 125 MB/s |
Device Supported | PC |
Host Interface | PCI |
Environmentally Friendly | Yes |
Chipset Manufacturer | Realtek |
Chipset Model | RTL8110SC |
Media Type Supported | Twisted Pair |
Country of Origin | China |
Height | 2.5" |
Width | 0.8" |
Product Model | ST1000BT32 |
Packaged Quantity | 1 |
Limited Warranty | Lifetime |
Network (RJ-45) | Yes |
Length | 4.8" |
System Requirements | - Windows® NT, ME, 2000, XP, Vista, 7, 8, 8.1, 10
- Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
- Netware Server 5.x, Netware ODI for DOS
- Linux 2.6.x to 4.11.x, Unix
- Mac OS X 10.4
|
|