HomeIndexesTripp LitePDUMH15ATNET

Tripp Lite PDUMH15ATNET Digital PDU Switched 120V 15A 5-15P 1U RM 8X5-15R 12ft

Tripp Lite PDUMH15ATNET

Click image to enlarge or see more views.


Tripp Lite

Model PDUMH15ATNET

UPC Code: 037332136428

Provantage Code:  TRPL1L9

  • Product Type: PDU
  • Input Receptacles: 2 x NEMA 5-15P
  • Input Voltage: 120 V AC
  • Output Receptacles: 8 x NEMA 5-15R
  • Power Rating: 1.80 kVA

100% Satisfaction Guaranteed

ComputingPower AccessoriesPower Distribution Units (PDU)

Tripp Lite PDUMH15ATNET Specifications

    PDUMH15ATNET Digital PDU Switched 120V 15A 5-15P 1U RM 8X5-15R 12ft


Summary

    Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power condition via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management to any type of network configuration. Supports notification and logging of input power status, event notification, output power and PDU loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 8 NEMA 5-15R outlets and two 12 ft. 5-15P optional-use dual cords for auto-transfer switching (ATS) option.

    Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS systems or to create a redundant dual-UPS power source for a critical, single-corded network device. Front AC input LED's show what input AC source is being utilized by the PDU.

Details

    Features Include
    • 120V 15A metered PDU system with Automatic Transfer Switch (ATS)
    • Dual input cords, one attached (primary) and one optional-use detachable cord (secondary)
    • Included cordsets support 5-15P plug-in connection
    • Front panel digital ammeter displays power consumption in amps.
    • Web/Network monitoring card enables remote power monitoring and control of power to each outlet
    • 8 built-in NEMA 5-15R output receptacles
    • Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware
    • Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches
    • Also supports 0U vertical mounting in the cable managment area of many rack enclosures
    • Indvidually controlled outlets provide load management to networked equipment
    • Sequential outlet turn on eliminates power up in-rush of connected devices on initial power up

    In the box

    • PDU with attached 5-15P input power cord
    • Detachable C13 to NEMA 5-15P 12 ft / 3.6m power cord for optional secondary input
    • User manuals with warranty information

Overview

    Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power condition via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management to any type of network configuration. Supports notification and logging of input power status, event notification, output power and PDU loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 8 NEMA 5-15R outlets and two 12 ft. 5-15P optional-use dual cords for auto-transfer switching (ATS) option. Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection.

Specifications

General Information
Product NamePDUMH15ATNET Digital PDU Switched 120V 15A 5-15P 1U RM 8X5-15R 12ft
Product ModelPDUMH15ATNET
Product TypePDU
Technical Information
Input Receptacles2 x NEMA 5-15P
Output Receptacles8 x NEMA 5-15R
Management
Management
  • Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails
  • Sequential outlet power-on prevents inrush-related equipment interaction on startup
  • Programmable or real-time outlet power control via web/network monitoring and control card
Power Description
Input Voltage120 V AC
Output Voltage120 V AC
Power Rating1.80 kVA
Physical Characteristics
Form FactorRack-mountable

Vertical Rackmount

Rack Height1U
Height1.8"
Width1.8"
Depth14.5"
Warranty
Limited Warranty2 Year
Miscellaneous
Package Contents
  • PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
  • PDU with attached 5-15P input power cord
  • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
  • User manuals with warranty information
Green CompliantYes
Other Information
Number of Cord / Cable2
Cord Length12
ColorBlack
Certifications & Standards
  • 60950
  • Class A
  • RoHS compliant
Supplies/Accessories for Tripp Lite PDUMH15ATNET






The Following Are Compatible With Tripp Lite PDUMH15ATNET






Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $1,500 for hardware, or $750 for cables.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2015 Provantage
Tripp Lite Model PDUMH15ATNET