- Analyze Gigabit and Wireless LANs to solve problems fast
- 10/100/Gig twisted pair LAN interface
- Gigabit fiber SFP LAN interface
- 802.11 a/b/g wireless LAN analysis
- Monitor network traffic and switch interfaces
- Discover devices, networks, VLANs, access points, mobile clients and more
- RFC 2544 and ITO network performance measurement
First responders to network emergencies rely on the EtherScope Series II network Assistant when it's time for action - a handheld portable network analyzer combining essential tools that help network professionals quickly solve the wide range of problems they encounter - 10,100 and Gigabit, twisted pair and optical fiber LANs and wireless LANs.
Less is more when you need to respond to network problems quickly. By integrating installation, troubleshooting and maintenance tools, the EtherScope Series II costs 17% less and drives a 66% time savings over a collection of single-purpose solutions. And EtherScope works right out of the box because it's 100% Fluke Networks. In addition, Series II is 60% smaller and 78% lighter which puts more troubleshooting power in your hands where and when you need it.
ES2-LAN plus SX Fiber Option.
EtherScope Network Assistant provides critical performance metrics about your wired and wireless LANs. The instruments autotest feature quickly verifies performance at the physical layer, discovers networks and devices, and identifies configuration and performance problems. For in-depth analysis, the instrument also includes a group of diagnostic tools to enable you to locate devices on your network and verify inter-connectivity.
The instruments user interface, which is presented on a color, touch-sensitive screen, is straightforward and intuitive. Simply by tapping a screen button, a navigation icon, or other on-screen element, you can drill down and obtain more detailed information or perform a specific operation.
Supports monitoring and testing of 10/100/1000 IEEE 802.3 (10BaseT, 100BaseTX, and 1000BaseT) networks through an RJ-45 interface, and the optional SFP fiber interface that supports 1000BaseSX, 1000BaseLX, and 1000BaseZX fiber. Discovers devices, networks, and VLANs, enabling you to view individual configurations, obtain health and status information, and view network activity, errors, and protocols used.
Fiber option enables the SFP fiber interface. Supports 1000BaseSX, 1000BaseLX, or 1000BaseZX fiber.
|Product Name||ES S2 LAN + SX Fiber|
|Product Type||Network Testing Device|
|Battery Life||4 Hour|
|Battery Chemistry||Lithium Ion (Li-Ion)|
|Additional Information||Communication and accessory ports 1 USB, 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle Network analysis ports RJ-45 10/100/1000BASE-T Ethernet (must be enabled) EMC Complies with EN61326, Class A, Criteria C Cable types Unshielded twisted pair LAN cables (100 and 120 Ohm UTP) Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP) Cable length 1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected Length resolution [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection greater than 20% Receive level 100 to 5000 mVp-p Datalink signal 500 to 4000 mVp-p Power over Ethernet (PoE) Solicit for IEEE 802.3af PoE, measure DC voltage (mV) on each pin, remove solicitation Measuring terminated cables The Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal. Wiremapper/office locator compatibility Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator. Fault tolerance The RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts. The RJ-45 connection is not for connection of public telephone systems and should only be connected to the public phone network through regulatory agency compliant modem devices. Fiber optic power meter Optical power meter compatibility The analyzer supports the Fluke Networks DSP-FOM optical power meter. Connection to the DSP-FOM is through the RF-45 Ethernet connection. Security Authentication types LAN: 802.1X EAP types TLS, GTC, MD5, MS-CHAP-V , LEAP, PEAP-GTC, PEAP-MD5, PEAP-MS-CHAP-V , PEAP-TLS, TTLS-PAP, TTLS-CHAP, TTLS-MS-CHAP, TTLS-MS-CHAP-V , TTLS-EAP-MD5, TTLS-EAP-GTC, TTLS-EAP-MS-CHAP-V , TTLS- EAP-TLS|