|E: Cisco Systems WAP4410N Wireless-N Access Point with PoE|
WAP4410N Wireless-N Access Point with PoE
|Manufacturer Part# WAP4410N|
|UPC Code: 745883583362|
- Product Type: Wireless Access Point
- Wireless LAN Standard: IEEE 802.11n
- Wireless Transmission Speed: 300 Mbps
- Limited Warranty: 3 Year
- Input Voltage: 12 V DC
|100% Satisfaction Guaranteed|
Note: We Are Unable to Sell this Product to Dealers.
Provantage is authorized to only sell this product to a final purchaser or licensee that has acquired it for their own use and not for resale, remarketing or distribution.
WAP4410N Wireless-N Access Point with PoE
With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The introduction of the Linksys Business Series WAP4400N wireless access Point answers the growing business' need for access, speed and security.
The access Point uses the very latest wireless networking technology, Wireless-N (draft 802.11n). By overlaying the signals of multiple radios, Wireless-N's Multiple In, Multiple Out (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce dead spots in the wireless coverage area.
The Linksys Wireless-N access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.
Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications.
To protect your data and privacy, the Wireless-G Exterior access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC Address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you appraised. Configuration is a snap with the web browser-based configuration utility.
The Linksys Wireless-N access Point with Power Over Ethernet is the best way to add wireless access to your existing business network.
The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install, you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.
|Product Name||WAP4410N Wireless-N Access Point with PoE|
|Product Type||Wireless Access Point|
|Gigabit Ethernet Port||Yes|
|Wireless LAN Standard||IEEE 802.11n|
|Wireless Transmission Speed||300 Mbps|
|Antenna Gain||2 dBi|
|Antenna Type||Omnidirectional Antenna|
|Number of Network (RJ-45) Ports||1|
|Total Number of Antennas||3|
|ISM Maximum Frequency||2.40 GHz|
|PoE (RJ-45) Port||Yes|
- MAC Address Control
- WEP 64/128-Bit
- IEEE 802.1x
|Input Voltage||12 V DC|
|Power Source||AC Adapter|
|Additional Information||Operating Modes:|
- Access Point Mode
- point-to-point Bridge Mode
- point-to- multipoint Bridge Mode
- Repeater Mode
- Wireless Client Mode
|Limited Warranty||3 Year|
Making a Large Volume Purchase?
|You may be able to save even more on your order if you meet the following Cisco Systems BIG DEAL qualifications:|
Purchase at least $20,000 of Cisco products to qualify.
Email us at email@example.com, or contact a Provantage account representative at 800-336-1166.
For more information, see Volume Purchases and Big Deal Registration.
Visit the Manufacturer