Cisco Systems Cisco 2 Port G.SHDSL-Ima Support

Cisco Systems HWIC-2SHDSL= Specifications

Cisco 2 Port G.SHDSL-Ima Support

Overview

The HWIC-2SHDSL 2-Pair DSL High-Speed WAN Interface Card (HWIC) provide G.SHDSL connectivity to a Wide Area Network .The 2-pair G.SHDSL HWIC provides two ports of 2-wire connectivity options. The HWIC-2SHDSL 2-Pair DSL High-Speed WAN Interface Card provides higher performance and increased reach when compared to the G.SHDSL WIC. The HWIC-2SHDSL 2-Pair High-Speed WAN Interface Card provide G.SHDSL connectivity to a Wide Area Network.The 2-pair G.SHDSL HWICs supersede the existing G.SHDSL WAN Interface Card which is a WIC-based G.SHDSL solution.

Compatibility

See all products Cisco 1841 Integrated Services Routers Cisco 2801 Integrated Services Routers Cisco 2811 Integrated Services Routers Cisco 2821 Integrated Services Routers Cisco 2851 Integrated Services Routers Cisco 3825 Integrated Services Routers Cisco 3845 Integrated Services Routers Cisco 1841 Integrated Services Router Cisco 2801 Integrated Services Router Cisco 2811 Integrated Services Router Cisco 2821 Integrated Services Router Cisco 2851 Integrated Services Router Cisco 3825 Integrated Services Router Cisco 3845 Integrated Services Router

Application/Usage

Wide Area Network Wide Area Network

Miscellaneous

Spare Product Supports Dying Gasp ATM over-subscription for DSL F5 OAM Continuity Check (F5OAMCC) Based on ITU Recommendation G.991.2 ATM traffic UBR, UBR+, VBR-nrt, VBR-rt, and CBR with traffic shaping Based on ITU Recommendation G.991.2 Offers symmetrical WAN speeds of 2.304 Mbps per pair up to 9.2 Mbps over four pairs on the 4-pair by bonding with IMA Version 1.1 Supports Wetting Current Sustains up to 8 permanent virtual circuits (PVCs) per HWIC Offers extensive ATM class-of-service (CoS) and IP quality-of-service (QoS) support The minimum Cisco IOS Software Release required for the G.SHDSL HWICs