HomeIndexesC2G40880

C2G Audio Amplifier 50W 4/8 Ohm

C2G 40880

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase at least $500 of C2G products to qualify.

Transceivers do not qualify.


Manufacturer Part#  40880

UPC Code: 757120408802

Provantage Code:  CBT9FYJ

Condition:  Factory New

  • Product Type: Amplifier
  • Country of Origin: Taiwan
  • RMS Output Power: 50 W
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ElectronicsHome ElectronicsHome Theater

Specifications

C2G 40880 Specifications

    Audio Amplifier 50W 4/8 Ohm


At a Glance


    Left View
    • 8 Ohm Amplifer
    • Plenum Rated
    • 50W Audio Amplifier
    • C2G 1 Year Warranty
    • TAA Compliant

Overview


    Front View

    The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications.

    Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

    After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.

    The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink® A/V Controller

    This amplifier accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.

    This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.

    The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.


Specifications

Product NameAudio Amplifier 50W 4/8 Ohm
Manufacturer Part Number40880
Product TypeAmplifier
Maximum Frequency Response20 kHz
RMS Output Power50 W
Number of Analog Audio Inputs2
Product ColorBlack
ClassificationD
Impedance8 Ohm
Environmentally FriendlyYes
Minimum Frequency Response20 Hz
Country of OriginTaiwan
Limited Warranty1 Year
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following C2G BIG DEAL qualifications:

Purchase at least $500 of C2G products to qualify.

Transceivers do not qualify.


Shop with confidence! Provantage is an authorized C2G dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

C2G
 
© Copyright 1984-2024 Provantage
C2G 40880